Set forwarding-options sampling family inet output

Set forwarding-options sampling family inet output

Posted: BoGoMoL1 Date of post: 23.05.2017

You can configure active sampling using a sampling instance and associate that sampling instance to a particular FPC, MPC, or DPC. In addition, you can define multiple sampling instances associated with multiple destinations and protocol families per sampling instance destination.

The following example shows the configuration of two sampling instances on an MX router running Junos OS Release 9. Active Flow Monitoring—Sampling Instance Configuration Topology Diagram.

Only one sampling instance can be attached to an FPC, MPC, or DPC. Multiple families can be configured under a sampling instance.

Each family can have its own collector address.

awa Network: Juniper JunOS Packet Capture Sampling

You can define sampling instances and attach each instance to different FPCs, or a single sampling instance can be attached to all FPCs. In this example, the ping command is issued on Router 1 to Router 2 via the MX router to generate traffic. After the packets are generated, show commands are issued to verify that the sampling configuration is working as expected. The following output shows the configuration of an MX router with two sampling instances.

The following set commands are used for the configuration of the sampling instance in this example. Replace the values in these commands with values relevant to your own network.

set forwarding-options sampling family inet output

To verify that your configuration is working as expected, use the following commands on the router that is configured with the sampling instance:.

The following shows the output of the show commands issued on the MX router used in this configuration example:.

Rate and give feedback: This document helped resolve my issue Yes No. Additional Comments characters remaining.

Juniper Routing Policy and Firewall Filters | Policy Terminology | InformIT

May we contact you if necessary? Would you like to Enable DynamicBooks buttons?

Related Documentation EX Series sampling-instance M Series Sampling Instance Configuration Configuring Active Flow Monitoring sampling-instance MX Series Sampling Instance Configuration Configuring Active Flow Monitoring sampling-instance QFX Series Sampling Instance Configuration T Series Sampling Instance Configuration Configuring Active Flow Monitoring sampling-instance.

Sampling Instance Configuration You can configure active sampling using a sampling instance and associate that sampling instance to a particular FPC, MPC, or DPC. Example Network Details Example Router Configuration Configuration Commands Used for the Configuration Example Verifying Your Work. The sampling configuration for this example includes the following: To verify that your configuration is working as expected, use the following commands on the router that is configured with the sampling instance: Previous Page Next Page.

Rating 4,5 stars - 377 reviews
inserted by FC2 system